#
| Instrument name
| Description
|
|
1
| Inductively coupled plasma mass spectrometry (ICP-MS)
| - Used to determine the elemental composition of various samples.
- It is a quadrupole ICP-MS system known for its ease of use, high throughput, and ability to deliver accurate results even in challenging sample matrices
- The detection limits of the instrument are able to achieve sub-ppt levels with the the innovative QCcell flatapole design, which allows comprehensive interference removal with helium Kinetic Energy Discrimination mode (He KED) or Chemical Reaction mode (CCT).
- The integrated Qtegra software provides ease-of- use operation experience.
|  |
2
| Microwave digestion milestone Ethos up High Performance Microwave Digestion System | - Used to prepare samples for various analytical techniques that measure the elemental composition of materials.
- The ETHOS UP is equipped with two 950 Watt magnetrons for a total of 1900 Watt making it the most powerful microwave digestion system available for sample preparation. The system additionally employs a rotating diffuser that evenly distributes the microwaves throughout the cavity.
- The new Milestone ETHOS UP microwave cavity has a volume of over 70 liters
- The ETHOS UP features a full stainless steel door with an innovative opening and self-resealing mechanism.
| 
|
3
| Thermo Scientific Dionex UltiMate 3000 UHPLC system (Ultimate 3000 UHPLC DAD)
| - Used to separate, identify, and quantify the components of a mixture
- The system includes a robust pump that can deliver a wide range of flow rates and pressures.
- Controlled by the Chromeleon Chromatography Management System software, which provides intelligent control, data processing, and run automation.
- Suitable for diverse industries and research areas, including pharmaceutical, food and beverage, environmental, and clinical diagnostics
|  |
4
| Bruker Tensor II FTIR
| Used to identify and characterize materials by analyzing their interaction with infrared light.
TENSOR II is the perfect choice for routine QA/QC and advanced R&D applications in industry and academia.
TENSOR II provides a smooth and complete solution for your analytical work flow. To perform your sample analysis just follow the guideline of the intuitive soft ware step-by-step.
|  |
5
| Differential Scanning Calorimetry (DSC 3500 Sirius)
| - Used to measure the amount of heat released or absorbed by a sample during heating or cooling over a range of temperature.
- The DSC 3500 Sirius unites state-of-the-art technology with high sensitivity in a robust, easy-to-operate measuring system across a temperature range from -170°C to 600°C.
- The heating wires of the furnace surround the entire sensor plate. They are arranged in such a way that no temperature gradients occur in or above the sensor disk.
- Protective and purge gas inlets are, of course, standard features of the unit. For improved cooling times and subambient temperature tests, various cooling options can be connected. Of course, a versatile gas switching and flow control system are also available.
|  
|
6
| Thermal Constant
| - Used to measure a material's thermal properties, specifically thermal conductivity, thermal diffusivity, and specific heat capacity.
- The TPS 2200 is used in various industries, including aerospace, automotive, materials science, and semiconductor manufacturing. It's also used in quality control and research and development labs.
- The TPS 2200 utilizes the TPS method, a non-destructive and accurate technique for measuring thermal properties.
- Accommodating various sample geometries and operating across a broad temperature range
- A selection of optional measurement modules allows the TPS 2200 to be used in several specialized applications, from precise testing of isotropic materials , to measurements of slab samples; anisotropic samples or layered structures ; thin films or coatings . And extremely light and low-conducting materials . Also featured is direct testing of specific heat capacity of bulk samples .
|   |
7
| Fluorescence spectrophotometer | - Used for quantitative measurements of chemical products. Fluorescence spectroscopy analyzes fluorescence from a molecule based on its fluorescent properties.
- The Cary Eclipse fluorescence spectrophotometer is able to scan at 24 000 nm/min without peak shifts due to the design of the monochromator drive mechanism. The grating is moved only when the lamp is off, resulting in a go-stop-flash method of taking a measurement. The wavelength does not change whilst a measurement is being taken.
• Signal-to-noise mode is a unique method of collecting data that allows you to control the level of precision you want across the whole scan. The instrument will scan quickly in areas of high emission and slow down in areas where the emission is less.
| 
|
8
| Dr 5000 UV-Vis spectrophotometer | - Used to measure the absorbance and transmittance of ultraviolet and visible light through a sample
- Maximum analysis flexibility with high speed wavelength scanning across the UV and visible spectrum
- Easily Add New Analytical Methods
- Multiple Cell Sizes and Delivery Methods
- Large Touch Screen Display and Interface.
|  |
9
| Surface tension/Dynamic Contact Angle analysis
| Features of DCAT instrument: The DCAT consists of the basic instrument with the following technical equipment: - High-precision electro dynamically compensated weighing system with automatic calibrating function.
- Software-controlled motorized height positioning of the temperature controllable sample vessel with variable speed,
- Temperature controllable sample vessel with build-in Pt100 probe and magnetic stirrer for the sample vessel with diameters of 50, 70 or 100 mm
- DCAT 21: Automatic balance lock; DCAT 11 manual balance lock
- Integrated measuring and control electronics with digital thermometer
- Graphical display for weighing data, temperature and other measuring statuses
- Serial RS 232C interface with PC connecting cable
- Illuminated sample chamber with connection for inert gas
- Pt100 temperature sensor for the installation in the temperature control unit
- support for the attachment of a liquid dispensing tube It is prepared for the installation of a liquid temperature control unit TV 50, TV 70 or
Key Uses and Applications of the DCAT 11
- Surface and Interfacial Tension Measurement: Determines the surface tension of liquids and the interfacial tension between two liquids using the Wilhelmy plate or Du Noüy ring methods.
- Powder/Fiber Wetting Studies: Analyzes the wetting behavior of powder beds and fiber bundles using the modified Washburn method.
- Critical Micelle Concentration (CMC) Calculation: Identifies the CMC of surfactants, particularly when combined with an automated liquid dosing unit (LDU) to create concentration series.
- Dynamic Contact Angle Analysis: Measures advancing and receding contact angles on solid samples (plates, films, powders, or fiber bundles), which helps determine the surface energy and wettability.
- Density Determination: Measures the density of both liquids and solids.
Main Features: - High-Precision Weighing System: Fast and accurate force measurement.
- Software-Controlled: Enables automated, reproducible measurements.
- Modular Accessories: Compatible with temperature control units (up to 300C)and various sample holders.
- Automatic Protection: Includes an automatic crash protection for the sensor.
Use:
The DCAT 11 is commonly used in industries such as pharmaceuticals, paints and coatings, surfactants, and electronics to analyze chemical stability, wetting behavior, and material surface properties.
| 
|
10
| Freeze Dryer | - Used to remove moisture through a process called sublimation.
- Because the freeze drying process does not use heat to remove water, the enzymes and terpenes in freeze dried products are not destroyed.
|  |
11
| Computerized Electronic Universal Testing Machine (WDW-2E)
| - Used to determine the strength, rigidity, and other mechanical properties of materials under tension.
- WDW-2E machines are used for testing materials like: Metals (steel, iron, etc.) Non-metals (rubber, plastics, etc.) Composites Textiles Springs Building components Automotive and aerospace structures And many more
|  |
